4 in 1 Quad Four Charge Stand for Sony Playstation 3 PS3 MOVE Controller
Introduction:
This product is suitable for wireless controller and PS MOVE PS3 controller is charged with, set charging and holder of two functions into one.
2 PS3 can handle the same time, a navigation controller and a dynamic controller for charging, efficient and safe.
With a common USB interface, compatible with various devices, such as the PS3 keyboard, Bluetooth headset, MP3, MP4, mobile phones.
1PCS 1PCS with power adapter and plug the European regulatory conversion.
Operating Voltage: DC 5V
Current: 2 A
Charging time is about 4-5 hours.
User Manual (instructions) :
1. The cradle through the power adapter is plugged in after power cradle on the smooth blue light goes on.
2. To handle and control access to the corresponding charging slot, smooth access to the charging connector, the corresponding indicator lights up red, indicating the handset or cradle is to charge the controller. If the PS3 at this time the handle is not connected to the host of the code, then the handle on the LED light will turn 4 and slow flash. If the handle has been the host of the code with the PS3, the handle will turn the corresponding LED lights flash slowly.
3. When the cradle to the PS3 controller fully charged, the corresponding joints of the charging indicator light will be lit by a red light into green light. If the PS3 at this time the handle is not connected to the host of the code, then the handle on the LED indicator will turn off 4. If the handle has been the host of the code with the PS3, the handle will turn the corresponding LED indicator lit.
4. To recharge other digital devices, just the cradle is powered, the USB connector device can access generic cradle.